Manuals / Enerco / Home Audio / Speaker

Enerco MH35FA, HS35FA owner manual Odor Fade Warning, Fuel GAS Odor, Odor Fading no Odor Detected

Models: HS35FA MH35FA

1 8
Download 8 pages 42.16 Kb
Page 4
Image 4

ODOR FADE WARNING

WARNING

Asphyxiation Hazard

•Do not use this heater for heating human living quarters.

•Do not use in unventilated areas.

•The flow of combustion and ventilation air must not be obstructed.

•Proper ventilation air must be provided to support the combustion air requirements of the heater being used.

•Refer to the specification section of the heater’s manual, heater dataplate, or contact the factory to determine combustion air ventilation requirements of the heater.

•Lack of proper ventilation air will lead to improper combustion.

•Improper combustion can lead to carbon monoxide poisoning leading to serious injury or death. Symptom of carbon monoxide poisoning can include headaches dizziness and difficulty in breathing.

FUEL GAS ODOR

LP gas and natural gas have man-made odorants added specifically for detection of fuel gas leaks.

If a gas leak occurs you should be able to smell the fuel gas. Since Propane (LP) is heavier than air you should smell for the gas odor low to the floor. ANY GAS ODOR IS YOUR SIGNAL TO GO INTO IMMEDIATE ACTION!

•Do not take any action that could ignite the fuel gas. Do not operate any electrical switches. Do not pull any power supply or extension cords. Do not light matches or any other source of flame. Do not use your telephone.

•Get everyone out of the building and away from the area immediately.

•Close all propane (LP) gas tank or cylinder fuel supply valves, or the main fuel supply valve located at the meter if you use natural gas.

•Propane (LP) gas is heavier than air and may settle in low areas. When you have reason to suspect a propane leak, keep out of all low areas.

•Use your neighbor’s phone and call your fuel gas supplier and your fire department. Do not re-enter the building or area.

•Stay out of the building and away from the area until declared safe by the firefighters and your fuel gas supplier.

•FINALLY, let the fuel gas service person and the firefighters check for escaped gas. Have them air out the building and area before you return. Properly trained service people must repair any leaks, check for further leakages, and then relight the appliance for you.

ODOR FADING - NO ODOR DETECTED

•Some people cannot smell well. Some people cannot smell the odor of the man-made chemical added to propane (LP) or natural gas. You must determine if you can smell the odorant in these fuel gases.

•Learn to recognize the odor of propane (LP) gas and natural gas. Local propane (LP) gas dealers will be more than happy to give you a scratch and sniff pamphlet. Use it to become familiar with the fuel gas odor.

•Smoking can decrease your ability to smell. Being around an odor for a period of time can affect your sensitivity to that particular odor. Odors present in animal confinement buildings can mask fuel gas odor.

•The odorant in propane (LP) gas and natural gas is colorless and the intensity of its odor can fade under some circumstances.

•If there is an underground leak, the movement of gas through the soil can filter the odorant.

•Propane (LP) gas odor may differ in intensity at different levels. Since Propane (LP) gas is heavier than air, there may be more odor at lower levels.

•Always be sensitive to the slightest gas odor. If you continue to detect any gas odor, no matter how small, treat it as a serious leak. Immediately go into action as discussed previously.

ATTENTION - CRITICAL POINTS TO REMEMBER!

•Propane (LP) gas has a distinctive odor. Learn to recognize these odors. (Reference Fuel Gas Odor and Odor Fading sections above.

•Even If you are not property trained in the service and repair of the heater, ALWAYS be consciously aware of the odors of propane (LP) gas and natural gas.

•If you have not been properly trained in repair and service of propane (LP) gas then do not attempt to light heater, perform service or repairs, or make any adjustments to the heater on the propane (LP) gas fuel system.

•A periodic sniff test around the heater or at the heater’s joints; i.e. hose, connections, etc., is a good safety practice under any conditions. If you smell even a small amount of gas, CONTACT YOUR FUEL GAS SUPPLIER IMMEDIATELY. DO NOT WAIT!

Enerco Group, Inc. Forced Air Propane Construction Heater

4

Operating Instructions and Owner’s Manual

Page 3 Page 5
Page 4
Image 4
Enerco MH35FA, HS35FA owner manual Odor Fade Warning, Fuel GAS Odor, Odor Fading no Odor Detected
Page 3 Page 5

HS35FA, MH35FA specifications

The Enerco MH35FA and MH35LPTS are robust and versatile forced air heaters designed to provide efficient heating solutions for both residential and commercial applications. Recognized for their reliability, these heaters are particularly favored in construction sites, workshops, and warehouses where temporary heating is essential during cold weather.

One of the main features of the Enerco MH35FA is its powerful heating capability. It can deliver up to 35,000 BTUs, making it effective in heating large spaces quickly. This model operates on propane, ensuring high energy efficiency, and can run for extended periods without interruption. The MH35FA is also equipped with a durable housing and components, enabling it to withstand harsh working conditions.

The MH35LPTS offers similar heating capabilities but is distinguished by its portability. This model comes with a built-in handle and lightweight construction, making it easy to move from one location to another. This feature is particularly useful for contractors who need to transport heaters between job sites. Both models are designed with safety in mind; they include features such as automatic shut-off mechanisms that activate in case of overheating or flame outages, providing peace of mind for users.

Equipped with advanced heating technologies, the Enerco heaters utilize a fan-driven operation that circulates warm air throughout the space effectively. The adjustable heat settings allow users to customize the temperature according to their specific needs, providing optimal comfort and efficiency. The heaters are also designed to be easy to operate, featuring simple controls that can be adjusted even while wearing gloves.

In terms of specifications, both models have a fuel consumption rate that makes them economical choices for long-term heating needs. They are compatible with standard propane tanks, allowing for easy refueling and reduced downtime. The low-maintenance design of Enerco heaters ensures they can operate reliably over multiple seasons with minimal upkeep.

Overall, the Enerco MH35FA and MH35LPTS stand out in the market for their combination of power, efficiency, and user-friendly features. Ideal for a variety of heating applications, these forced air heaters continue to be a popular choice for anyone seeking a dependable and effective heating solution.