Enfora GSM2228UG001

Mini-MT User Guide

Revision 1.02

13. Browse to the correct location of the drivers, and click OK.

14. When the drivers have completed installing, you will see the following screen:

15. Click on Finish.

GSM2228UG001 Page 22

Contents

Main Page Page Page Page Page Table of Contents Page Page 1 Introduction Mini-MT User Guide Revision 1.02 2 Product Specifications 3 Getting Started 4 Overview of the Enfora Mini-MT Page 4.1 LED Indicators 4.2 Switches 4.2.1 Push To Call (PTC) 4.2.2 Set Geo-Fence 4.2.3 User-Defined button 4.2.4 Volume Buttons 4.3 Interconnections 4.3.1 USB Connection 4.3.2 Headphone Jack 4.3.3 Speaker 4.3.4 Microphone 4.3.5 SIM 4.3.6 Battery 5 Battery Removal / Insertion / Charging 5.1 Removing the battery 5.2 Inserting the battery 5.3 Charging the battery Page 6 SIM Card Insertion / Removal Enfora is not liable for damages to the Mini-MT when inserting a SIM card inside the device. Page 7 Mini-MT Configuration 7.1 Dispatch Number 7.2 SMS Destination 7.3 Set Geo-Fence 7.4 User-Defined button(s) 7.4.1 User-definable Button 7.4.2 User-definable Button > 7.5 Setting the Emergency Call number 7.6 Dialing the Emergency Call Number 8 PC Software Installation 8.1 Mini-MT USB Composite Device Driver Page Page Page 8.2 Mini-MT USB to UART Device Driver Installation Page Page 8.3 Configuring the PC and Verifying Communications. 8.3.1 Default Serial Parameters 8.3.2 Determine which COM port to use Page 8.4 Start HyperTerminal Page Page 8.5 Demo Configuration to the Enfora Test Server 8.5.1 Reset the modem to factory defaults 8.5.2 Connecting the Mini-MT to the Enfora Test Server 8.5.3 Configure the Modem to Access the GPRS network. 8.5.4 Verify Registration Status 8.5.5 Verify GPRS Activation 8.5.6 Configure the modem to access the Enfora Server. Page 8.5.7 Verifying Server connectivity. Page Page 9 GPS Operation and Verification 9.1 Verification of GPS Lock 9.2 Verify GPS operation 9.2.1 GPS Operation from Enfora Demo Server 10 Safety Information for Wireless Devices 10.1 RF Exposure 10.2 Scientific evidence on RF exposure Page 11 FCC Compliance Statement 12 Product Safety Instructions Revision History