Secondary Installation

 

 

 

Figure 45: Rock Placement of Four Large Rocks.

Figure 46: Rock Placement of Two Medium Rocks.

3. The four (4) large rocks are placed across front

 

 

of burner (see Figures 45 & 46). These rocks

 

are all the same shape, but must be rotated

 

in different positions to fit in the cut-aways in

 

the burner base. When there installed correctly,

 

there should be no visible gaps between the

 

rocks and the burner base. The gaps between

 

the rock cluster and the four (4) large rocks

 

needs to be maintained as smaller gaps will lead

 

to carbon deposits and build up.

 

4. Place the two (2) medium rocks; one on either

 

side of the cluster as shown in Figures 46 &47.

 

These rocks can not be placed down between

 

the others.

 

Figure 47: Rock Placement of Seven Small Rocks.

5. Addition the seven (7) small rocks. These can be

 

added in some fashion like what’s shown in Figures 47 & 48 with three (3) on the top row with the larger one in the center and two (2) smaller ones on either side.

7.Check that the rock set is laid out as shown in Figure 48 and install door.

8.Light the unit to enure it has a good flame (see Front Cover).

CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.

Figure 48: Rock Placement Complete.

NOTES:

a. Some sooting on the rocks is normal. The sooting should just be a thin covering in some places on the center three (3) rocks of the rock cluster. There should not be continuous build up.

b. Surface cracks may appear after prolonged use. This is due to the expansion and contraction of materials during heating cycles. Surface cracks are not a problem as long as the assemblies are maintaining there positions, and operation does not appear to be altered.

26

Page 26
Image 26
Enviro 50-1628, Cara DR, C-11366 owner manual Addition the seven 7 small rocks. These can be

50-1628, C-11366, Cara DR specifications

Enviro 50-1628 is a revolutionary piece of technology designed to enhance sustainability and efficiency in various applications, particularly in the field of environmental management. This advanced system focuses on achieving ecological balance while delivering high performance, making it a valuable asset for industries aiming for greener operations.

One of the main features of the Enviro 50-1628 is its cutting-edge filtration technology. The system utilizes multi-stage filtering mechanisms that purify air and water, effectively removing pollutants and contaminants. This is accomplished through a combination of mechanical, chemical, and biological processes, ensuring that the output meets or exceeds regulatory standards. The efficiency of the filtration system plays a crucial role in reducing environmental impact by minimizing harmful emissions and discharges.

Another notable characteristic of the Enviro 50-1628 is its intelligent monitoring capabilities. Equipped with advanced sensors, the system continuously collects data on environmental parameters such as air quality, temperature, and humidity. This real-time data is processed through sophisticated algorithms, enabling proactive adjustments to optimize system performance. This not only improves the efficiency of operations but also allows for timely interventions to prevent potential environmental hazards.

In terms of energy efficiency, the Enviro 50-1628 is designed with sustainability in mind. It incorporates renewable energy sources, such as solar panels, to power its systems, significantly reducing dependency on fossil fuels. Moreover, its modular design allows for easy scalability, enabling facilities to expand their capacity while maintaining energy efficiency and reducing carbon footprints.

The Enviro 50-1628 is also user-friendly, featuring an intuitive interface that allows operators to easily monitor and control various functions. This accessibility is crucial for promoting best practices in environmental management, ensuring that organizations can effectively implement and adhere to sustainability initiatives.

Furthermore, the Enviro 50-1628 is built with durability in mind, utilizing high-quality materials to ensure long-lasting performance even in demanding environments. This resilience not only extends the lifespan of the system but also reduces maintenance costs, making it a cost-effective solution for businesses committed to sustainable practices.

In summary, the Enviro 50-1628 stands out as a powerful tool in the pursuit of environmental sustainability. Its advanced filtration technology, intelligent monitoring systems, energy efficiency, user-friendly interface, and durable construction make it an excellent choice for industries looking to minimize their ecological footprint while maximizing operational efficiency. By integrating such technologies, organizations can take significant strides towards a greener future.