Envision Peripherals G912WA2 First Setup

First Setup

Congratulation for purchasing this monitor of high performance!

This monitor comes with the following accessories:

1. LCD Monitor

2. Owner's Manual

3. Power Cord

4. D-Sub Cable

5. Audio Cable

1. Install / Remove the base

Place the display onto the base.

Align the display with the swivel on the base and plug the display into the

base.

Hold up the display and then smack the base by hand to remove it.

Install Remove

Figure 1 Installing and Removing the Swivel Base

2. Connect video cable (D-Sub cable)

Make sure both monitor and computer are powered OFF. Connect the

video cable ( D-Sub cable) to the computer,then to the monitor.

3. Connect audio cable

Connect one end of the audio cable to the back of the monitor and

connect the other end to the computer’s audio out port.

4. Connect power cord

Connect the power cord to a properly grounded AC outlet,then to the

monitor

5. Power-ON computer and monitor

Power-ON the computer,then Power-ON the monitor