EpsonNet WinAssist
The EpsonNet WinAssist program lets you configure the print server using Windows XP, Me, 98, NT 4.0, or 2000. This section includes system requirements and installation instructions. See the online Administrator’s Manual for complete instructions on using EpsonNet WinAssist.
System Requirements
Operating system | Windows XP Professional and Home |
| Windows Me/98 |
| Windows 2000 Server and Professional |
| Windows NT 4.0 (Service Pack 3.0, or later) |
|
|
CPU | 486/DX (Pentium or better recommended) |
|
|
Memory | 64MB (for Windows Me/98) |
| 128MB (for Windows XP/2000/NT 4.0) |
|
|
Hard drive space | 20MB |
|
|
Installing EpsonNet WinAssist
Before you install the software, make sure you set up the required protocols and services in your operating system. If you install EpsonNet WinAssist before you add or delete protocols or services, the software may not work. You may need to uninstall and then reinstall it. See the online Administrator’s Manual for more information.
Follow these steps to install EpsonNet WinAssist:
1.Insert the
2.Select Install EpsonNet WinAssist, then follow the instructions on the screen to install the program.
You can also run the SETUP program in the ENWINA\Disk1 folder on the
8