EPSON ActionLaser 1100
Open the front cover.
Rest one hand on top of the printer. With the other hand, grasp the toner cartridge by the molded center grip and pull upward until the cartridge unlocks and releases.
Tilt the front of the cartridge downward slightly until it is level and then slide it out of the printer. The cartridge will not slide smoothly unless it is level.
Discard the cartridge with nonburnable items.
Remove the new toner cartridge from its aluminum bag.
Remove the shipping spacer from the cartridge by pulling up the horizontal tab. Then remove the protective cap at the end of the cartridge.
l0. Gently shake the toner cartridge back and forth a few times to distribute the toner evenly.
11.While holding the cartridge steady with one hand, firmly grip the tab on the left side of the cartridge. Pull the clear seal all the way out with firm, even pressure as shown. Do not pull up on the seal.
12.With one hand, hold the toner cartridge in the middle. Place the other hand on the rear of the printer to hold it steady while you insert the cartridge.
13.Insert the cartridge into the opening at the front of the printer. Position the locking knobs on both sides of the cartridge into the guides inside the printer.
14.Slide the cartridge into the printer until it stops. Then push the cartridge firmly until it locks in place.
15.Close the front cover and press the top corners to lock it into position.
Laser Printers | 8/15/94 |
|