2 Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
3 If your image looks like 
or 
, you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the screen, facing the screen squarely.
4 If your image looks like 
or 
, press the 
or 
buttons on the projector to correct it.
3 Choose a Presentation Method
How do you want to get images to the projector?
• To connect to a notebook, see “If connecting to a notebook” below.
• To project over a wireless network, see |
|
“If projecting wirelessly” on the back of this sheet. | Computer cable |
You must have installed the projector’s EasyMP™ software and configured your projector and computer before you can project wirelessly. See your User’s Guide for instructions.
•To give a presentation stored on a flash drive, digital camera, or other USB storage device, see Chapter 5 in your User’s Guide.
•To connect to your notebook using the included USB cable, see your User’s Guide.
If connecting to a notebook...
1 Make sure you’ve turned on the projector and adjusted the image as described in sections 1 and 2.
2 Locate the computer cable that came with the projector. Connect one end to the projector’s blue Computer (Component Video) port.
Connect the other end to your notebook’s 
monitor port.
3 Press the Source Search button on the projector or the remote control until your computer image is displayed.
Turn over