Using the remote control

1 If this is your first time using the remote, make sure its batteries are installed as shown (two AAA batteries).

Turn projector on and off

Zoom in on part of

the projected image

Navigate projector menus

Turn off projector display and sound

Choose which source to display

Control projector volume

You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide.

Where to get help

Telephone Support Services

To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time,Monday through FridayCanada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,

Monday through Friday

Toll or long distance charges may apply.Internet Support

Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

Visit http://www.presentersonline.com to access tips, templates, and training for developing successful presentations.

Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg.

Quick Setup

PowerLite 1810p

Troubleshooting

If you see a blank screen...

If you see a blank screen or the No signal message after turning on your notebook, check the following:

Make sure the Power light on the projector is green and not flashing, and the A/V Mute slide (lens cover) is open.

Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source.

If you’re using a Windows® notebook, press the function key on your keyboard that lets you display on an external monitor. It may be

labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting.

If the projector and notebook
don’t display the same image...

If your image displays either on the projector or notebook, but not on both, check the following:

Windows

Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector,

or display on both at the same time.

If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled.

1. From the Windows Control Panel, open the Display utility. In Windows Vista,TM right-click on the desktop and select Personalize, then select Display Settings.

2. In the Display Properties dialog box, click the Settings tab, then click Advanced.

In Windows Vista, click Advanced Settings.

3. The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. See your notebook’s manual or online help for details.

Macintosh® OS X1. From the Apple® menu, select System Preferences, then select Displays.2. Select the VGA Display or Color LCD dialog box.3. Click the Arrangement (or Arrange) tab and click Mirror Displays.

Epson is a registered trademark and Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. © 2006 Epson America, Inc. 12/06

Printed in XXXXXX

CPD-23262