R

 

 

E

 

T

H

 

E

 

 

 

 

Connect the projector

R

 

A

 

 

 

T

 

 

to your notebook

 

S

 

 

 

 

1 Locate the required cables:

Power cord

VGA computer cable

2 Connect the computer cable to the blue Computer1 port on the projector.

3 Connect the other end to your notebook’s

video-out or monitor port.

NOTE: If your notebook has a DVI connector, you need to use an optional DVI-to-VGA adapter with the included computer cable (see your computer’s documentation).

4 Connect the power cord to the projector, then plug the other end into an electrical outlet.

Turn on your equipment

1 Turn on your notebook.

2 Open the A/V Mute slide (lens cover).

NOTE: The slide must be opened completely.

Make sure the Power light

Power light

3 is orange and not flashing.

 

 

Power button

4 Press the Power button

 

to turn on the projector.

 

To shut down the projector:

1. Press the Power button twice.

2. When the orange light stops flashing and the projector beeps, you can unplug the projector.

PowerLite® 1810p
Quick Setup

Before using the projector, make sure you read the safety instructions in the User´s Guide on your projector CD.

Follow these instructions to connect the projector to your notebook. For other setup options, see your User’s Guide.

Adjust the image

1 If you’ve turned on your notebook and you don’t see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.

2 To raise the image, press the foot release button for the front adjustable foot and lift the front. Release the button to lock the foot in position.

3 Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

Focus

Zoom

4 If your image looks like , , , or , press the Quick Setup button on the projector and follow the on-screen instructions.

Turn over