Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network (PowerLite 1880).
Wired Network Projection
Using Quick Wireless Connection (Windows Only)
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Crestron RoomView Support

Wired Network Projection

You can send images to your projector through a wired network (PowerLite 1880). To do this, you
connect the projector to your network, and then set up your projector and computer for network
projection.
After connecting and setting up the projector as described here, install the network software from the
Epson Projector Software CD-ROM on your computer. Use the following software and documentation to
set up, control, and monitor network projection:
•EasyMP Network Projection software sets up your computer for network projection. See the
EasyMP Network Projection Operation Guide installed from your projector CD for instructions.
•EasyMP Monitor software (Windows only) lets you monitor and control your projector through the
network. You can download the latest software and documentation from the Epson web site. Go to
www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and select your projector.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic: Using the Projector on a Network

Connecting to a Wired Network

To connect the projector (PowerLite 1880) to a wired local area network (LAN), use a 100Base-TX or
10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1. Connect one end of the network cable to your network router.
39