8-2 Scanner
R4C428_V2
long.bk Rev_C
A5 size SCAN.FM
1/14/00 Pass 2
LProof Sign-off:
tantoname _______
leadername _______
editorname _______
Loading the Document
Follow the directions in this section to load docume nts into the
document feeder of your Stylus Scan. If you are scanning fragile
or thin media, see “Loading thin or fragile media” on page 8-3.

Loading normal media

Follow the steps below to load a document into the document
feeder.
1. Adjust the document edge guides so that distance between
them is slightly wider than the width of the document.
2. Hold the document you want to scan face down, and place
the top edge of the document between the document edge
guides.
Note:
Be sure to place the top edge of the document into the document
feeder first. If the document is too wide to fit into the feeder in
this manner, try loading the document sideways. After
scanning, you can rotate the image 90 degrees using the
scanning software.