Safety Instructions 2-5
R4C428_V2
long.bk Rev_C
A5 size SAFE.FM
1/14/00 Pass 2
R
Proof Sign-off:
tantoname _______
leadername _______
editorname _______
Before transporting the Stylus Scan, make sure the print head
is in the home (far right) position and the ink cartridges are
in place.
When handling the ink cartridges
Keep ink cartridges out of the reach of children. Do not allow
children to drink from or otherwise handle th e cartridges.
If ink gets o n your skin, wash it off w ith soap and water. If i t
gets into your eyes, flush them immedia tely with water.
Do not shake the ink cartridges; this can cause leakage.
Install the ink cartridge immediately after you remove it from
its package. Leaving the cartridge unpacked for a long time
before use may result in reduced print quality.
Once you install an ink cartridge, do not ope n the clamp or
remove the cartridge except to replace it with a new one.
Otherwise, the cartridge may become unusable.
Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
Do not dismantle the ink cartridges or try to refill them. Doing
so may damage the print head.
When choosing a place for the Stylus Scan
Place the EPSON Stylus Scan on a flat, stable surface that
extends beyond the Stylus Scan base in all directions. The
Stylus Scan will not operate properly if it is tilted or at an
angle.
Avoid places subject to rapid changes in temperature and
humidity. Also, keep the Stylus Scan away from direct
sunlight, strong light, and heat sources.