2-4 Safety Instructions
R4C428_V2
long.bk Rev_C
A5 size SAFE.FM
1/14/00 Pass 2
LProof Sign-off:
tantoname _______
leadername _______
editorname _______
❏Do not attempt to service the EPSON Stylus Scan yourself.
❏Unplug the Stylus Scan and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liqui d has entered the
Stylus Scan; the Stylus Scan has been dropped or the cabinet
damaged; the Stylus Scan does not operate normally or
exhibits a distinct change in performance.
❏If you are using the Stylus Scan in Germany, observe the
following:
To provide adequate short-circuit protection and over-
current protection for this Stylus Scan, the building
installation must be protected by a 16 Amp circuit breaker.
Bei Anschluß des Druckers an die Stromversorgung muß
sichergestellt werden, daß die Gebäudeinstallation mit einem
16 A- Überstromschalter abgesic hert ist.
A Few Precautions

When using the Stylus Scan

❏Do not put your hand inside the Stylus Scan or touch the print
head during operation.
❏Do not move the print head by hand. Doing so may damage
the EPSON Stylus Scan.
❏Always turn of the Stylus Scan using the
P power button.
When this button is pressed, the
P power light flashes briefly
and then goes off. Do not unplug the Stylus Scan or turn off
the power to the outlet until the
P power light stops flashing.