EPSON
Environmental
|
|
| Humidity (without |
| Temperature | condensation) | |
|
|
|
|
Operation (plain | 41 to 95 | °F (5 to 35 °C) | 10 to 80% RH |
paper) |
|
|
|
|
|
|
|
Operation | 59 to 77 | °F (15 to 25 °C) | 30 to 60% RH |
(recycled paper, |
|
|
|
envelopes, labels |
|
|
|
or roll paper) |
|
|
|
|
|
| |
Storage | 0 to 85% RH | ||
|
|
|
|
Paper
Use recycled paper, multipart paper, labels, envelopes, and roll paper only under normal temperature and humidity conditions, as follows:
Temperature | 59 to 77 °F (15 to 25 °C) |
Humidity | 30 to 60% RH |
Do not load paper that has been folded or is damaged, wrinkled, or curled.
Single sheets, front or rear entry
| Minimum | Maximum |
|
|
|
|
|
Width* |
| ||
(inch) | 3.9 | 10.1 | 16.5 |
(mm) | 100 | 257 | 420 |
|
|
|
|
Length** |
|
|
|
(inch) | 3.9 | 14.3 |
|
(mm) | 100 | 364 |
|
|
|
|
|
Thickness*** |
|
|
|
(inch) | 0.0025 | 0.0055 |
|
(mm) | 0.065 | 0.14 |
|
|
|
|
|
Weight |
|
|
|
(lb) | 14 | 24 |
|
(g/m²) | 52 | 90 |
|
|
|
|
|
Quality | Plain paper and recycled paper |
| |
|
|
|
|
*7.2 to 8.5 inches (182 to 216 mm) using the optional
7.2 to 16.5 inches (182 to 420 mm) using the optional
**8.3 to 14.3 inches (210 to 364 mm) using the optional
***0.0028 to 0.0055 inch (0.07 to 0.14 mm) using the optional
| Minimum | Maximum |
|
|
|
|
|
Width |
| ||
(inch) | 3.9 | 10.1 | 16.5 |
(mm) | 100 | 257 | 420 |
|
|
|
|
Length |
|
|
|
((inch) | 3.9 | 14.3 | 16.5 |
(mm) | 100 | 364 | 420 |
|
|
|
|
Copies | 1 original + 5 copies |
| |
|
|
|
|
Total thickness |
|
|
|
(inch) | 0.0047 | 0.018 |
|
(mm) | 0.12 | 0.46 |
|
|
|
|
|
Weight per sheet of |
|
|
|
multipart |
|
|
|
(lb) | 12 | 15 |
|
(g/m²) | 40 | 58 |
|
|
|
|
|
Quality | Carbonless multipart forms with a line of glue at | ||
| the top or one side of the form |
| |
|
|
|
|
Continuous paper (ordinary and multipart):
| Minimum | Maximum |
|
|
|
|
|
Width |
| ||
(inch) | 4.0 | 10.0 | 16.0 |
(mm) | 101.6 | 254.0 | 406.4 |
|
|
|
|
Length, one page |
|
|
|
(inch) | 4.0 | 22.0 |
|
(mm) | 101.6 | 558.8 |
|
|
|
|
|
Copies | 1 original + 5 copies |
| |
|
|
|
|
Total thickness |
|
|
|
(inch) | 0.0025 | 0.018 |
|
(mm) | 0.065 | 0.46 |
|
|
|
|
|
Weight, ordinary |
|
|
|
paper |
|
|
|
(lb) | 14 | 22 |
|
(g/m²) | 52 | 82 |
|
|
|
|
|
Weight per sheet of |
|
|
|
multipart |
|
|
|
(lb) | 12 | 15 |
|
(g/m²) | 40 | 58 |
|
|
|
|
|
Quality | Plain paper, recycled paper, and carbonless | ||
| multipart forms with point gluing or paper | ||
| stapling on both sides |
| |
|
|
|
|
Do not load thick paper, such as multipart forms with five or six parts, in the rear slot.
The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1.
The thickness of the perforation part when extended should be 1 mm or less.
The perforation between pages should not extend all the way to the edges of the paper. Uncut length on the edges should be
1 mm or more.
The horizontal and vertical perforation cuts should not cross.
4 - EPSON | 6/03 |