Epson Perfection 2480 Photo
Start Light
The scanner’s ] Start light indicates the scanner status.
] Start light | Scanner status |
|
|
Flashing green | Warming up or scanning. |
|
|
Green | Ready to scan. |
|
|
Flashing red | Make sure the transportation lock is unlocked. |
| Try restarting your computer and unplugging the |
| scanner. Wait 10 seconds, then plug the scanner |
| back in. |
|
|
Off | Make sure your scanner is connected to your |
| computer and plugged into a power source. |
|
|
Transporting the Scanner
Before transporting the scanner for a long distance or storing it for an extended period of time, you need to lock the scanner’s carriage to prevent damage.
1.Plug in the scanner, connect it to your computer, and wait until the carriage moves to the home position (position nearest the buttons). While the ] Start light is green, unplug the scanner.
2.If the cover cable is attached, disconnect it.
3.To lock the transportation lock, lift the scanner and slide the lock to the locked position. This secures the carriage.
Related Documentation
Epson Perfection 2480/2580 Photo | |
| Start Here sheet |
Epson Perfection 2480/2580 Photo | |
| Scanner Software |
Epson Perfection 2480/2580 Photo | |
| Notices booklet |
— | Epson Perfection 2480/2580 Photo |
| Reference Guide (HTML) |
Caution: Do not turn the scanner over; this may damage it.
4.Attach the protective materials and repack the scanner in its original box.
6/04 | Epson Perfection 2480 Photo - 5 |