EPSON Perfection 3170

If you are scanning slides, place the holder on the scanner. Then place the slides in the holder. (Place the slides so the “this side to lamp” indication is facing down.)

4.Close the scanner cover.

5.Start EPSON Scan and make sure the correct Document Type is selected: either Color Negative Film, B&W Negative Film, or Positive Film (for slides and transparencies).

Select Dust

Removal

Tip: Make sure your film is dust-free for the best scan. You can also select the Dust Removal setting in EPSON Scan, as shown above.

Indicator Light

The indicator light (on the ] Start button) indicates the status of the scanner, as described below.

Light

Color

Status

 

 

 

On

Green

The scanner is ready to scan images.

 

 

 

Flashing

Green

The scanner is initializing (warming up) or is

 

 

busy scanning.

 

 

 

Flashing

Red

Check the following, then turn your

 

 

scanner off and back on to reset it:

 

 

Make sure the transportation lock is

 

 

turned to the unlocked position. See

 

 

the Start Here sheet for details.

 

 

Try restarting your computer and

 

 

turning the scanner off and then on

 

 

again.

 

 

If this does not eliminate the error, the

 

 

fluorescent lamp may need to be replaced

 

 

or the scanner may have another problem.

 

 

Consult your dealer or EPSON.

 

 

 

Off

The scanner is unplugged or turned off.

 

 

 

Related Documentation

CPD-16343

EPSON Perfection 3170 Photo Start Here

 

poster

CPD-16345

EPSON Perfection 3170 Scanner Software

 

CD-ROM

CPD-16344

EPSON Perfection 3170 Notices booklet

Reference Guide (HTML)

6 - EPSON Perfection 3170

8/03