Epson Perfection 3590 Photo

Removing Dust From Film or Slides

Using the Dust Removal feature in EPSON Scan’s Full Auto, Home, or Professional Mode, you can virtually “clean” the dust marks from film or slides as you scan them. For detailed steps, see the on-screen User’s Guide.

Full Auto Mode

Home and Professional Mode

Reading the Scanner Light

The scanner’s ] Start light indicates the scanner status.

] Start light

Scanner status

 

 

Flashing green

Warming up or scanning.

 

 

Green

Ready to scan.

 

 

Flashing red

Make sure the transportation lock is unlocked.

 

Try restarting your computer and unplugging the

 

scanner. Wait 10 seconds, then plug the scanner

 

back in.

 

Film may be jammed in the auto film loader.

 

Disconnect the scanner from the computer, wait

 

10 seconds, and connect it to the computer again

 

to see if the film ejects on its own. If film is still

 

jammed, see your on-screen User’s Guide.

 

If the red light is still flashing, contact Epson.

 

 

Off

Make sure your scanner is connected to your

 

computer and plugged into a power source.

 

 

6 - Epson Perfection 3590 Photo

6/05