STYLUS 800 Service Manual Disassembly and Assembly
3.1 OVERVIEW
This section describes procedures for disassembling the main components of this printer. Unless
otherwise specified, the disassembled unit or components can be reassembled simply by reversing
the disassembly procedure. The assembly procedure is, therefore, omitted. Precautions for any
disassemble or
assemblv
Procedure are titles
“~sassemblY/As*mblY
points”. Adjustments
,
.
.
required after assembling the unit are titled “Required
Adjustrn&ts”.
-
3.1.1 Precautions for Disassembling the Printer
Refer to the precautions below when disassembling the printer.
H
Disconnect the power cable before disassembling or assembling the printer.
H
Wearprotectivegoggles to protect youreyesfiom ink.
Ifinkgets
in your eyes, wash it
away
withfiesh
water and see a doctor immediately.
If the ink comes into
contuctwith
skin
(i.e,
hands), wash it
oflwith
soap and water. If
irn”tation
occurs, contact a physician.
■
Never remove the ink cartridge
j?orn
the carriage unless specified to do so.
■
When transporting the
prhter
afierinstalling the ink
cati”dge,
be sure to pack the
printer for transportation without removing the ink
ca~”dge.
9
Use only recommended tools for disassembling, assembling, or adjusting the
pn”nter.
■
Apply
luti”cants
and adhesives as specified. (See Chapter 6.)
H
Make specified adjustments when you disassemble the printer. (See Chapter 4.)
Rev. A
3-1