Epson PowerLite Cinema 500 Projector
Adjusting the Color
You can use the Color Adjustment settings to
1.Select Picture Quality, then click Adjustment of image.
2.Select one of the following modes, then click Adjust.
❏RGB: Adjusts the offset, gamma, and gain for each signal color. Use Offset to adjust darker shades, Gamma for intermediate shades, and Gain for the lightest shades.
❏RGBCMY: Adjusts the hue and saturation for each of six colors, as shown on the color palette below. After moving a slider bar, click Apply.
Adjust the hue (red, green, blue, cyan, magenta, yellow)
Adjust the saturation
Saving and Recalling Picture Settings
Once you’ve adjusted the picture to your liking, you can save your settings in the projector’s memory. Then you can use the remote control (or Cinema Color Editor) to recall them for future use. You can also rename or delete memory settings stored on the projector.
1.Select Picture Quality, then click Memory management.
Use these settings to select, register, or edit a memory setting
2.Click one of the following:
❏Select to use a memory setting stored on the projector
❏Register to create a new memory setting
❏Edit to change the name of an existing setting
See the User’s Guide for details.
Optional Accessories
Epson provides the following optional accessories:
Product | Part number |
|
|
Replacement lamp (ELPLP28) | V13H010L28 |
|
|
Air filter replacement (ELPAF04) | V13H134A04 |
|
|
Ceiling mount | ELPHB01 |
|
|
Kensington security lock | ELPSL01 |
|
|
Macintosh adapter set (includes monitor | ELPAP01 |
adapter and desktop adapter) |
|
|
|
ELPSV01 | |
|
|
You can purchase these accessories from your dealer, by calling Epson at (800)
Related Documentation
EPSON PowerLite Cinema 500 | |
| User’s Guide |
CPD- 17303 | EPSON Extra CareSM Home Service |
| warranty |
Note: Setup instructions are provided in the User’s Guide. There is no setup sheet.
2/04 | Epson PowerLite Cinema 500 Projector - 11 |