Epson 500 Using Cinema Color Editor, Remote Control Operations, Adjusting the Picture Quality

Epson PowerLite Cinema 500 Projector

Using Cinema Color Editor

Cinema Color Editor is a program that lets you use your computer to operate the projector in place of the remote control, and to make fine custom color adjustments.

Note: See the User’s Guide for instructions on installing Cinema Color Editor and connecting the projector to your computer.

Remote Control Operations

You can use Cinema Color Editor to change the image source, adjust the aspect ratio, or turn the power off—just as you would from the remote control.

1.Open Cinema Color Editor, then click the Remote Control tab.

Select Remote Control

Turn off the power

Change the image source (see page 5)

Adjust the aspect ratio (see page 6)

2. Click one of the buttons for the options shown above.

Adjusting the Picture Quality

You can use Cinema Color Editor in place of the projector’s menu system to adjust the image.

1.Click the Picture Quality tab.

First, select

Picture Quality

Then click one of these buttons to access additional settings

2.Click one of the buttons shown above to access these settings:

Button	Available adjustments
	Input Adjustment
	Brightness
	Color Intensity
	Tint
	Sharpness
	Color Temp. and Flesh Tone
	Tracking
	Sync
	Color Mode
	Color Adjustment (see next section)
	EPSON Super White
	Progressive
	Motion Detection
	Output Scaling
	Setup Level
	Noise Reduction
	DVI-Video Level
	Auto Setup

Note: See the User’s Guide for details on using these settings.

10 - Epson PowerLite Cinema 500 Projector 2/04