Doing More with EpsonMovieMate 53
5. Press to exit the menu.
Viewing Status Information and Resetting the Lamp Timer
You can use the Info page on the Visual Setup menu to view the number of hours the lamp
has been used, and to reset the timer after you install a new lamp. You can also view video
signal information and error codes for any problems that occur.
1. Press on the remote control. You see the Visual Setup menu.
2. Press to highlight Info, then press to display the lamp usage and other
information.
Note: If the lamp has been used less than 10 hours, 0H is displayed.
3. To reset the lamp timer after replacing the lamp, press .
4. Press to exit the menu.