6.Place the ink cartridges in their holders with the blue labels facing up and toward the back of the printer. Then press down the clamps until they lock into place.
Keep ink cartridges out of the reach of children.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water.
7.Press the
cleaning button to begin charging the ink delivery system. Then close the printer cover.
Charging can take two to three minutes. The 
power light flashes and the printer makes various sounds until it’s finished. Don’t turn off the printer or interrupt the charging process or you’ll use more ink than necessary. Charging is complete when the 
power light stops flashing and stays on.
Never turn off the printer when the 
power light is flashing unless the printer hasn’t moved or made any noise for more than 5 minutes.
5 Load Paper
Load a stack of plain paper or special ink jet paper. A sample pack of EPSON ink jet papers came with your printer. Smaller size papers, such as 4 x
1.Pull out the output tray extensions. Slide the left edge guide so it’s slightly wider than your paper.
left edge guide
2.Load your paper with the printable side up (on special or ink jet paper, this side is coated or whiter). Place it against the right edge guide, then slide the left edge guide against the other side.
don’t load paper |
|
above this mark | right edge guide |