To connect a video source to the projector:

1.Turn off the projector and video source if they are on.

2.If your video source uses a small, round, one-prong composite (RCA) video connectors, you’ll need the audio/visual cable that comes with the PowerLite 7000. If your video source uses a large, round, four-prong S-Video connector, you will need to purchase an S-Video cable.

3.For composite video, connect the yellow RCA plug on one end of the audio/visual cable to the projector’s Video In jack. Connect the other yellow RCA plug to the video-out jack of your video source.

4.Connect the other plugs on the audio/visual cable to the Audio In jacks of the projector: insert the white plug into the L Audio In jack and the red plug into the R Audio In jack. Connect the plug at the other end of the audio/visual cable to the audio output jacks of the video source.

■ ■ ■ ■ ■ ■ ■

Connecting to a Computer

25