Epson 700 Series Using the Control Panel

Using the Control Panel

The control panel is adjustable. To raise it, lift it as shown below. To lower it, press

the button and push the control panel down.

Caution:

To avoid damaging the Artisan 700 Series, always press the button to lower the control panel. Don’t try to push it down.

Display/Crop

View Auto Correct Stop/Clear Settings

Blue status light

■To save energy, the LCD screen goes dark after 13 minutes of inactivity. Press any button (except the P On button) to wake it up.

■To switch the display screen from displaying one photo at a time to 9 photos at a time, press the Display/Crop button 3 times when viewing your photos.

■The blue status light at the bottom of the panel flashes when the Artisan 700 Series is operating or performing routine maintenance.

Note:

If the blue status light flashes rapidly, check the control panel for error messages.

Using the Control Panel 5