Menu Options
■ ■ ■ ■ ■
■
47
Video Menu (Image source = Video) The Video menu lets you make adjustments to the projected
image. The following options are available when the image
source is Video.
♦
Note:
The projector’s image source must be set to Video, and the
video source (such as a VCR or camcorder) must be connected
and operating for you to access these menu options (for example,
the projector must actually be projecting an image from a video
tape, if you’re using a VCR).
Menu item Description
Position Select this item by pressing the Enter button to enter
the screen position adjustment mode. Then use the
Enter button to move the screen position in the
corresponding direction.
When you finish making adjustment, press the Esc
button to return to the Video submenu.
Brightness Lightens or darkens the overall image. Increase
brightness to lighten an image, or decrease it to
darken the image.
Contrast Adjusts the difference between light and dark areas.
Increase the contrast to make light areas lighter and
dark areas darker. Decrease it to minimize the
difference between light and dark areas.
Color Adjusts color density. Increase the setting for darker
and more opaque colors.
Decrease it for lighter and less opaque colors.
Tint Adjusts the red-green color balance of the screen.
Increase tint to add more green, (NTSC only) or
decrease it to add more red. This setting only works
with NTSC video signals.
Sharpness Adjusts the screen sharpness.
Increase the sharpness to make screen images more
sharp, or decrease it to make the images less sharp.
Gamma Adjusts the projected imagery for natural coloration.