note
When the projector has not received any input signals for 30 minutes, it automatically turns off the projector lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the Power button.
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating.
1.If you’re using a computer, shut it down first.
2.To turn off the projector, press the Power button on the projector or remote control. You see a confirmation message. (If you don’t want to turn it off, press any other button.)
Page down | Page up | Power |
Computer | Color Mode | |
Menu | A/V Mute | Freeze |
caution
To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange.
3.Press the Power button again. The power light flashes orange for about forty five seconds as the projector cools down. When the projector has cooled, the orange light stays on and the exhaust fan shuts off.
If you want to turn the projector on again, wait until the orange light stops flashing. Then press the Power button.
4.Retract the front feet as shown.
28Using the Projector