Epson 740c Resetting the Lamp Timer, Press the, You see this screen:, 4.Select Yes and press Enter, 5.When you’re finished, press Esc or Menu to exit

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the projector’s menus.

1.Press the Menu button on the remote control or on the projector’s control panel. You see the main menu.

2.Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight Reset, then press Enter.

You see this screen:

3. Select Lamp Hours Reset and press Enter. You see this prompt:4.Select Yes and press Enter.5.When you’re finished, press Esc or Menu to exit.

Maintaining the Projector 65