R

 

E

 

T

H

 

E

 

 

 

 

 

R

 

 

 

T Connect the projector

A

 

 

 

S

 

to your notebook

 

 

 

1 Locate the required cables:

Power cord VGA computer cable

2 Connect the computer cable to

the blue Computer/Component Video port on the projector.

3 Connect the other end to your notebook’s video-out

or monitor port.

NOTE: If your notebook has a DVI connector, you need to use an optional DVI-to-VGA adapter with the included computer cable (see your computer’s documentation).

4 Connect the power cord to the projector, then plug the other end into an electrical outlet.

Turn on your equipment

1 Turn on your notebook.

2 Remove the projector’s lens cover.

3 Make sure the Power light is orange and not flashing.

Power button

Power light

4 Press the Power button to turn on the projector.

CAUTION: Before unplugging the projector...

Shut down the projector properly:

1. Press the Power button twice.

2. When the orange light stops flashing and the projector beeps, you can unplug the projector.

Epson® PowerLite® 750c/760c
Quick Setup

Follow these instructions to connect the projector to your notebook. For other setup options, see your User’s Guide.

Adjust the image

1 If you’ve turned on your notebook and you don’t see an image, press the Source Search button on the projector to select the image source.

NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.

2 Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

3 If your image looks like or , you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

4 If your image looks like or , press the or buttons on the projector to correct it.