Epson 760c Positioning the Projector, Safety and Approvals, Compatible Video Formats, Compatible Computer Display Formats, Note:

Epson PowerLite 750c/760c Projector

Safety and Approvals

United States	FCC 47CFR Part15B Class B (DoC)
	UL60950 Third Edition
Canada	ICES-003 Class B
	CSA C22.2 No. 60950
CE Marking	Directive 73/23/EEC, 89/336/EEC
	IEC 60950 Third Edition
	EN 55022, EN 55024
	Pixelworks™ DNX™ ICs are used in
	this projector.

Compatible Video Formats

The projector supports the video display formats listed below:

Mode	Refresh rate (Hz)
NTSC	60
NTSC 4:43	60
PAL	50
N—PAL	50
M—PAL	60
PAL—60	60
SECAM	50
HDTV (720p)	60
HDTV (720p)	50
HDTV (1080i)	60
HDTV (1080i)	50
SDTV (480p)	60
SDTV (480p)	50
TV480i	60
TV480i	50

Compatible Computer Display Formats

To project images from a computer, set the computer’s video card at a refresh rate (vertical frequency) compatible with the projector; see the following table for compatible formats. Some images are automatically resized to display in the projector’s native format (XGA). The frequencies of some computers may not allow images to display correctly; see your computer’s documentation for details.

Mode	Refresh rate (Hz)	Resolution
VGA EGA	70	640 ⋅	350*
VGA—60	60	640 ⋅	480*
VESA—72	72	640 ⋅	480*
VESA—75	75	640 ⋅	480*
VESA—85	85	640 ⋅	480*
SVGA—56	56	800 ⋅	600*
SVGA—60	60	800 ⋅	600*
SVGA—72	72	800 ⋅	600*
SVGA—75	75	800 ⋅	600*
SVGA—85	85	800 ⋅	600*

Mode	Refresh rate (Hz)	Resolution
XGA—60	60	1024 ⋅	768
XGA—70	70	1024 ⋅	768
XGA—75	75	1024 ⋅	768
XGA—85	85	1024 ⋅	768
SXGA1—70	70	1152 ⋅	864*
SXGA1—75	75	1152 ⋅	864*
SXGA1—85	85	1152 ⋅	864*
SXGA2—60	60	1280 ⋅	960*
SXGA2—75	75	1280 ⋅	960*
SXGA2—85	85	1280 ⋅	960*
SXGA3—60	60	1280 ⋅	1024*
SXGA3—75	75	1280 ⋅	1024*
SXGA3—85	85	1280 ⋅	1024*
SXGA+60	60	1400 ⋅	1050*
SXGA+75	75	1400 ⋅	1050*
SXGA+85	85	1400 ⋅	1050*
UXGA—60	60	1600 ⋅	1200*
iMAC VGA	117	640 ⋅	480*
iMAC SVGA	95	800 ⋅	600*
iMAC XGA	75	1024 ⋅	768
MAC13	67	640 ⋅	480*
MAC16	75	832 ⋅	624*
MAC19—60	59	1024 ⋅	768
MAC19	75	1024 ⋅	768
MAC21	75	1152 ⋅	870*

* The image is resized using Epson’s SizeWise™ Technology.

Positioning the Projector

Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting.

❏Place the projector on a sturdy, level surface, between 3.2 and 39.7 feet from the screen.

❏Make sure there is plenty of space for ventilation around and under the projector. Do not set the projector on top of anything that could block the vents under the projector.

❏Make sure the projector is within 6 feet of an electrical outlet or extension cord and within 5 feet of your computer and/or video source.

❏Place the projector directly in front of the center of the screen, facing the screen squarely. Otherwise, your image will not be rectangular.

Note:

It’s easier to position the projector when the screen is directly in front of the room. If the screen is placed diagonally in a corner, it’s much more difficult to aim the projector correctly at the screen and get a rectangular image.

2 - Epson PowerLite 750c/760c Projector 8/05