Epson 7850p Select, . Select, Highlight, Highlight, , highlight, , then press, menu, then press, 134Using the Projector’s Menus, Choosing When to Display the Image

Choosing When to Display the Image

After your image is saved, you can set it up as the startup screen, or the screen you see when there’s no signal or when you press the A/V Mute button (see page 38).

1.Press the Menu button to display the menu screen (if not already displayed).2.To display your image as the startup screen, highlight the

Advanced1 menu, then press Enter. Select Startup Screen, highlight ON, then press Enter.

To display your image on the No-Signal or A/V Mute screen, continue with the following steps.

3.Highlight the Setting menu, then press Enter.4.Select the screen(s) on which you want your image to appear:

■Highlight No-Signal Msg. if you want to display your image (instead of a blank screen) when there is no video signal incoming from the currently selected source.

■Highlight A/V Mute if you want your image to appear when you press the A/V Mute button.

5.Select Logo, then press Enter. This sets your image as the screen to be displayed. (Or select Blue if you prefer to display a blue screen instead.)

6.When you’re finished, press ESC to exit.

134Using the Projector’s Menus