Epson 7900p Adjust the image, Where to get help, Troubleshooting, If you see a blank screen, If the projector and notebook, don’t display the same image

Adjust the image

1 Rotate the focus ring to sharpen the image.

Focus ring

Zoom ring

NOTE: If you see a blank screen No signal ( ? Help) after focusing, see the instructions to the right.

2 Rotate the zoom ring to reduce or enlarge the image. Turn to W (wide) to enlarge or T (tele) to reduce. (You can also move the projector closer to or farther from the screen.)

3 To raise the image, press up on the blue foot release lever for the front adjustable foot. Lift the front of the projector. Once the image is positioned where you want it, release the lever to lock the foot in position.

			Front adjustable
			foot
4 If your image looks like	or	, you’ve placed the projector
off to one side of the screen, at an angle. Move it directly in
front of the center of the screen, facing the screen squarely.
5 If your image looks like	or	, the Auto Keystone correction
feature has been disabled. You can manually adjust the keystone
correction value by pressing the		or	Sync buttons on the

projector. Or, to enable Auto Keystone correction, see your User’s Guide.

Where to get help

Telephone Support Services

To use the EPSON PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the EPSON PrivateLine Support card included in your Start Here kit. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time,Monday through FridayCanada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,

Monday through Friday

Toll or long distance charges may apply.Electronic Support Services

EPSON provides technical assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com.

Quick Setup

EPSON® PowerLite® 7900p

Troubleshooting

If you see a blank screen...

If you see a blank screen or the No signal message after turning on your notebook, check the following:

Make sure the power light on the projector is green and not flashing and the lens cover is off.

No signal ( ? Help)Try turning off the notebook and restarting it.

If you’ve only connected your notebook to the projector and you’ve used the VGA computer cable, press the Comp button on the remote control. If you’ve connected more than one computer and/or video source, press the button on the remote control for your image source (Comp, DVI, BNC, S-Video, or Video). Allow a few seconds for the projector to sync up after pressing it.

Note: The EasyMP button is not functional on the PowerLite 7800p.

If the projector and notebook

don’t display the same image...

If your image displays either on the projector or notebook, but not on both, check the following:

WindowsHold down the Fn button and press the function key that lets you

display on an external monitor. It may have an icon such as , or it may be labeled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it.

On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time.

You might need to use the Display utility in the Windows Control Panel to enable both the LCD screen and external monitor port. Check your notebook’s manual or online help for details.

Macintosh® OS X

1.	From the Apple® menu,	Click here
1.	From the Apple® menu,
	select System Preferences,
	then click Displays.
2.	Select the VGA Display or	Make sure
	Color LCD dialog box, click the	this is checked
	Arrange (or Arrangement) tab,

and make sure Mirror Displays is checked.Macintosh OS 9 or earlier

1.	From the Apple menu, select	Click here
	Control Panels, then click
	Monitors or Monitors and Sound.
2.	Click the Arrange icon,	Drag one monitor
	then drag one monitor	Drag one monitor
	then drag one monitor	icon on top of
	icon on top of the other.	the other
	This lets you display on the

projector screen as well as the LCD screen.

3.If the Arrange option isn’t available, click the Monitor icon and select a Simulscan resolution.

Epson is a registered trademark and EasyMP is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

CPD-18738