Note: To keep children from turning on the projector, you can use the Child Lock (see page 31).

If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for details.

The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on the next page.

Turning Off the Projector

1.Turn off any equipment connected to the projector.

2.Press the Off button on the remote control, or press the Power button on the projector twice.

3.When the P power light stops flashing orange and stays on, turn off the projector’s power switch on the back.

It is now safe to unplug the projector, if necessary.

Caution: Turn off this product when not in use to prolong the life of the projector. Continuous 24-hour-a-day use may reduce the overall life of the product. Never unplug the projector without turning it off and letting it cool as described above, or you could damage it and reduce lamp life.

Selecting the Image Source

The Source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a DVD player, cable or satellite box, or video game console).

Press the Source button on the remote control that

 

corresponds to the port to which your video source is

Source

connected.

buttons

22 Setting Up the Projector