Screen Options

■Message

Settings Æ Display Æ Message

Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes).

■User’s Logo

Settings Æ User’s Logo

Lets you display an image of your choice when the projector is warming up, not receiving a signal, or when you press the Blank button to temporarily stop projection.

To capture the image, first set the projector to display the image you want to use. Then select User’s Logo and follow the instructions on the screen. When done, change the Display Background setting to Logo, as described below.

Record

Move the frame to select the

Select the display ratio

area you want to record

 

■Startup Screen

Settings Æ Display Æ Startup Screen

Turn this setting off if you want to prevent your logo (see above) from appearing while the projector is warming up.

■Display Background

Settings Æ Display Æ Display Background

Changes the screen that’s used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection. Select Blue (instead of Black) or Logo to display your logo on a black background.

44 Making Detailed Adjustments