Controlling the Projector

While giving your presentation, you may want to switch between video sources, adjust the volume, pause the action or sound, or display a picture within your current video display. Make sure you have set up your projector and connected your audio or video source as described in Chapter 1.

Selecting Your Video Source

If the projector is connected to more than one computer and/or video source, you can use the buttons on the remote control or the control panel to switch between the different sources.

On the control panel, press the Computer button to switch between the computer sources and press the Video button to switch between standard (composite) video, S-Video, and component video (BNC).

On the remote control:

■Press the Comp1 button to select the Computer 1 source.

■Press the Video button to switch between a standard composite video source and an S-Video source.

■Press the Comp2/YCbCr to select the Computer 2 or component video source.

After you select a source, the screen goes dark for a moment before the image appears.

Select computer 1

Select video source

E@sy-MP

Adjusting Sound Volume

Using the remote control or the control panel, you can adjust the volume of your video or computer sounds.

Adjust volume

■To increase the volume, press on the right (+) side of the Volume button.

■To reduce the volume, press on the left (–) side of the Volume button.

Select computer 2 or component video

Using the Projector 51