EPSON PowerLite 8300i Projector

Using Keystone Correction

To adjust your image when the right and left sides are uneven, do one of the following:

❏Use the Keystone buttons on the projector’s control panel to adjust the image shape.

Keystone buttons

❏Or use the Keystone function in the projector’s menu system. (Press the Menu button on the remote control, select the

Setting menu, and press Enter. From the

Setting menu, select Keystone and press

Enter. Then select V-Keystoneand press

Enter. Adjust the setting as needed.)

Menu button

Note: After using Keystone correction, the image will be slightly shorter. If it’s important to maintain the correct aspect ratio, you can stretch the image to its proper size using the Height setting in the Keystone menu.

Using Quick Corner

Use Quick Corner to correct the image shape when it’s uneven on the top and bottom, or on all sides.

1.Press the Menu button on the remote control (or on the projector’s control panel).

2.Select the Setting menu and press Enter.

3.From the Setting menu, select Keystone and press Enter.

4.Select Quick Corner and press Enter. You see this screen:

5.Press the Enter button to select the corner you want to adjust.

6.Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape.

7.Repeat steps 5 and 6 as needed to adjust any remaining corners.

8.When done, press ESC to exit the menu system.

Correcting Computer Images

If you’ve connected a computer and the image doesn’t look right or fit properly on the screen, press the Auto button on the remote control (or the Auto/Enter button on the projector’s control panel). This automatically resets the projector’s tracking, sync, resolution, and position settings.

Auto button

Note: You must be projecting an image for this button to have any effect. The Auto button works only with computer images.

5/03

EPSON PowerLite 8300i Projector - 9