Using the remote control

1 If this is your first time using the remote, make sure its batteries are installed as shown.

2 Push up on the remote control’s ON/OFF switch to turn it on.

Quick Setup

Epson PowerLite 830p

Troubleshooting

If you see a blank screen...

If you see a blank screen or the No signal message after turning on your notebook, check the following:

Make sure the Power light on the projector is green and not flashing, and the lens cover is off.

Press the Computer/Component button on the projector to select Computer 1 as the image source.

If you’re using a Windows® notebook, press the function key on your keyboard that lets you display on an external monitor. It may be

labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting.

Zoom in on part of the projected image

Turn off projector display and sound

Navigate projector menus

Focus the image

Control projector volume

Turn projector on and off

Freeze the projector display (presentation and sound continue unless stopped)

Choose which source

to display

Optimize the computer image

If the projector and notebook
don’t display the same image...

If your image displays either on the projector or notebook, but not on both, check the following:

Windows

Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector,

or display on both at the same time.

If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled.

1. From the Windows Control Panel, open the Display utility.

2. In the Display Properties dialog box, click the Settings tab, then click Advanced.

You can use the remote control to control the projector. With an optional USB cable, you can use the remote as a wireless mouse.

For more information on using the remote control, see your User’s Guide.

Where to get help

Telephone Support Services

To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included in your Start Here kit. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time,Monday through FridayCanada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,

Monday through Friday

Toll or long distance charges may apply.Electronic Support Services

Epson provides technical assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com.

3. The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.

See your notebook’s manual or online help for details.Macintosh® OS X1. From the Apple® menu, select System Preferences, then select Displays.2. Select the Color LCD dialog box.3. Click the Arrangement (or Arrange) tab and click Mirror Displays.Macintosh OS 9.x or earlier

1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound.

2. Click the Arrange icon.3. Drag one monitor icon on top of the other.

If the Arrange option isn’t available, click the Monitor icon and select a Simulscan resolution.

Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. © 2004 Epson America, Inc. 5/04

Printed in XXX

CPD-18224