|
| R | |
| E |
| |
T | H |
| E |
|
| ||
|
|
| |
R |
|
|
|
T Connect the projector | |||
A |
|
| |
| S |
| to your notebook |
|
|
| |
1 Locate the required cables:
Power cord | VGA computer cable |
2 Connect the computer cable to the Computer 1/Component port on the projector.
3 Connect the other end to your notebook’s
or monitor port.
NOTE: If your notebook has a DVI connector, you need to either use a
4 Connect the power cord to the projector, then plug the other end into a grounded electrical outlet.
Turn on your equipment
1 Turn on your notebook.
2 Remove the projector’s lens cover.
3 Make sure the Power light is orange and not flashing.
Power button
Power light
4 Press the 
Power button to turn on the projector.
CAUTION: Before unplugging the projector...
Shut down the projector properly:
1. Press the 
Power button twice. Let the projector cool while the Power light flashes orange (about 30 seconds).
2. Once the light stops flashing and stays on, it’s safe to unplug the projector.
Epson® PowerLite® 830p
Quick SetupFollow these instructions to connect the projector to your notebook. For other setup options, see your User’s Guide.
Adjust the image
1 If you’ve turned on your notebook and you don’t see an image, press the Source Search button on the projector to select the image source.
NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.
2 Press the Focus buttons to sharpen the image. Press the Zoom buttons to reduce or enlarge the image.
Zoom
to adjust the image size
Select an image source
Focus to sharpen the image
3 If your image looks like | or | , you’ve placed the projector off | ||
to one side of the screen at an angle. Place it directly in front of the | ||||
center of the screen, facing the screen squarely, or press the or | ||||
Tracking buttons on the projector. |
|
|
| |
4 If your image looks like | or | , press the | or | Sync buttons |
on the projector. |
|
|
|
|