EPSON Stylus Photo 870
Don’t touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the printer components and case.
Don’t get water on the printer components and don’t spray lubricants or oils inside the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing the printer in its new location.
Follow these steps:
1.Turn on the printer, wait until the print head locks in the far right position, then turn off the printer.
2.Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer.
3.Remove any paper from the printer and remove the paper support.
4.Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover.
Tape the ink cartridge holder to the printer case
5.Push in the output tray extensions and close the tray.
6.Repack the printer and attachments in the original box using the protective materials that came with it. See the unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the print head and test your printer. If you notice a decline in print quality, clean the print head (see page 8); if output is misaligned, align the print head (see page 9).
Related Documentation
| EPSON Stylus Photo 870/EPSON Stylus |
| Photo 1270 Service Manual |
| EPSON Stylus Photo 870 Parts Price List |
| EPSON Stylus Photo 870/1270 Printer |
| Basics |
| EPSON Stylus Photo 870/1270 Start Here |
| EPSON Stylus Photo 870/1270 |
| Unpacking the Printer |
| EPSON Stylus Photo 870 printer software |
|
|
10 - EPSON Stylus Photo 870 | 2/00 |