EPSON Stylus Photo 875DC

Removing the Memory Card

You should eject your memory card before you use EPSON USB RW Switcher to toggle between read-only and write-to- disk mode. If you have a Macintosh or you’re running Windows 2000 and have enabled write-to-disk mode, you should also eject your memory card before you turn off your printer or disconnect the USB cable.

Use one of these procedures to eject the memory card:

❏If you’re running Windows 98, press the card eject lever to eject the memory card and card adapter.

❏If you’re running Windows 2000 and have not enabled write-to-disk mode, press the card eject lever to eject the memory card and card adapter. If you have enabled write- to-disk mode, left-click the Eject Hardware icon on the Windows taskbar and click Stop EPSON SP 875DC Storage. Then press the card eject lever to eject the memory card and card adapter.

❏If you have a Macintosh, select the memory card icon on your desktop. From the Special menu, select Eject. Wait until you see a message that the memory card can be removed from the card drive, and then press the card eject lever to eject the card and card adapter.

Never remove the memory card or turn off power to either the printer or computer while the card access light is flashing. The computer and memory card reader are communicating, and removing the card or turning off power could corrupt memory card data.

Viewing Photos on the Memory Card

To view photos on the memory card, do one of the following:

❏Click View Pictures in PC Card Slot if the Image Expert™ view screen appears at startup.

❏Click the View PC Card Images button on Image Expert’s toolbar.❏Select View Images from Image Expert’s Camera menu.

If you don’t see the View PC Card Images button or the View Images command, or if you see a message similar to the one below, the connection between the computer and memory card may be set to USB/Serial.

To view the images on the card, you must change the connection to PC Card.1.Do one of the following:❏If you see a Connection Failed message, click theConnection button.

❏Select Connection from Image Expert’s Camera menu if you don’t see the View PC Card Images button, or you don’t see the View Images command.

You see a screen similar to this one:2.In the Connect Via box, select PC Card. Then clickOK.

Closing EPSON PhotoStarter

If you don’t want to start Image Expert automatically when you insert the memory card in the printer’s memory card slot, you can close PhotoStarter.

Windows: Right-click the EPSON PhotoStarter icon on the Windows taskbar, and click End on the menu that appears.

Macintosh: Click the Application menu on the right side of your desktop’s menubar, and then click EPSON PhotoStarter. Click Quit on the File menu.

The next time your restart your computer, EPSON PhotoStarter automatically launches.

Uploading Photos to Your Memory Card

To upload photos from your computer to the memory card, EPSON USB RW Switcher must be installed on your computer. USB RW Switcher lets you toggle your memory card between read-only mode and write-to-disk mode.

1.Eject the memory card from the memory card slot (see “Removing the Memory Card”).

2.Windows: Click Start, point to Programs, EPSON USB RW Switcher, and select EPSON USB RW Switcher.

Macintosh: Open the EPSON USB RW Switcher folder on your hard drive. Double-click the EPSON USB RW Switcher icon.

4/00

EPSON Stylus Photo 875DC - 8