EPSON PowerLite 8000i/9000i Projector
3.Use a screwdriver to loosen the two retaining screws on the lamp cover. When the screws are loose, lift off the lamp cover. (You cannot remove these screws from the cover.)
4.Use a screwdriver to loosen the three screws holding the lamp unit in place. (You cannot remove these screws completely.) Then lift up the handle and pull out the lamp unit.
5.Gently insert the new lamp unit by lowering it into position. Make sure it’s inserted securely. Tighten the screws on the new lamp unit.
6.Replace the lamp cover and tighten the cover screws. (Make sure the lamp cover is securely fastened. The projector turns itself off if the lamp cover is open.)
Optional Accessories
To enhance your use of the projector, EPSON provides the following optional accessories:
Product | Product number |
Customized carrying cases for the projector and its cables:
Hard shell carrying case | ELPKS22 |
ATA shipping case | ELPKS21 |
Replacement lamp and air filter | ELPLP08 |
Short throw zoom lens | ELPLW01 |
Long throw zoom lens | ELPLL02 |
Fixed short throw lens | ELPLR01 |
Communication kit cable set and computer cable so you can connect your projector to a second computer. There is also a Mac®adapter set so you can connect to a second Macintosh. You may also need the
ELP communication cable set | ELPKC04 |
Computer video cable | ELPKC02 |
(HD15/H15, 1.8m) |
|
Computer video cable | ELPKC09 |
(HD15/HD15, 3.0m) |
|
Portable projection screen | ELPSC06 |
|
|
Remote IR receiver | ELPST02 |
Mediaphile™ PAS | ELPPAS1 |
(personal audio system) |
|
Mediaphile CVS | ELPCVS1 |
(clear voice system, wireless |
|
microphone and satellite speakers) |
|
|
|
You can purchase these accessories from your dealer or by calling EPSON Accessories at (800)
Related Documentation
CPD 9112 | EPSON PowerLite 8000i/9000i |
| User’s Guide |
CPD 9113 | EPSON PowerLite 8000i/9000i |
| Quick Setup Poster |
Service Manual | |
Parts Price Lists |
8 - EPSON PowerLite 8000i/9000i Projector | 10/99 |