EPSON Stylus COLOR 900N

Ethernet Card Specifications

Your EPSON Type B Ethernet Interface Card (C823632) lets you connect the printer directly to your network.

link selection lightstatus sheet

Control Panel

The four lights on your printer’s control panel show the printer’s status and alert you to problems like paper jams.

paper out light
button
status lights
black ink

 

out light

power

color ink
light

out light

 

 

10BaseT/100BaseTX connectors

Environmental

Temperature

 

Operation

41 to 95 °F (5 to 35 °C)

Storage

−22 to 158 °F (−30 to 70 °C)

Humidity (without condensation)

Operation

20 to 80% RH

Storage

5 to 95% RH
Vibration

 

Operation

5 to 55 Hz at 0.4 G

Storage

5 to 55 Hz at 1 G
Shock

4 G

Network Software Supported

NetWare® 3.1x, 4.1x, or 5EtherTalk® (AppleTalk®)TCP/IP protocol1pr, ftp over TCP/IP protocol NetBEUI over TCP/IP protocol

Network Connectors and Signal Assignments

 

 

 

 

 

 

 

cleaning button

 

power button

 

 

load/eject

 

button

 

 

P is on

The P power light is on when the printer is on and ready to

 

print. It flashes when the printer is receiving a print job or

 

performing a maintenance operation, such as cleaning the

 

print head.

 

 

 

S flashes

When the S paper out light flashes, you have a paper jam.

 

Turn off the printer and gently pull out all paper. Make sure

 

none of the sheets are curled, creased, old, stuck together,

 

or too thin. Then reload the stack against the right edge

 

guide and slide the left edge guide over to the paper’s left

 

edge. Then turn the printer on.

S is on

When the S paper out light comes on, your paper is out or

 

incorrectly loaded. Make sure none of the sheets are curled,

 

creased, old, stuck together, or too thin. Then reload the

stack against the right edge guide and slide the left edge guide over to the paper’s left edge. Press the E load/eject button to resume printing.

Bor A When an ink out light flashes, your ink supply is low. Make

flash

sure you have a replacement cartridge.

Bor A When an ink out light comes on, you need to replace the ink

are on

cartridge. See page 8 for instructions.

Pand S When the P power and S paper out lights flash and the

flash, B black and A color ink out lights come on, jammed paper

and

may be blocking movement of the print head. Turn off the

Band A printer, wait a few seconds, and turn it back on. If no paper

are on

ejects, turn off the printer, remove the jammed paper, and

 

turn it on again. If the lights still flash or stay on, contact

 

your dealer or EPSON.

P S B A When all the lights flash, your printer may have an internal

flash

error. Make sure you removed all the packing material as

 

described on the unpacking sheet in your printer box. Then

 

turn off the printer, wait a few seconds, and turn it on again.

 

If the lights still flash or stay on, contact your dealer or

 

EPSON.

RJ-45, ISO/IEC 8802–3 12.6 MDI Specification

Regulatory Approvals

EMC FCC part 15B Class A

Reliability

MTBF 268,973 hr (power on, 100% duty)

P S B A When all the lights are off, the printer is not receiving

are off

power. Try these solutions:

 

❏ Make sure the printer is turned on.

 

❏ Turn off the printer, plug in the power cord securely,

 

and turn on the printer again.

 

❏ Make sure the outlet is not controlled by a switch or

 

timer and is operable.

3/99

EPSON Stylus COLOR 900N - 5