Solutions When There is No Sound or Low Volume
Solutions to Microphone Problems
Parent topic: Solving Problems
Solutions When No Image Appears
If no image appears, try the following solutions:
Make sure the lens cover is open or off.
Press the A/V Mute button to see if the image was temporarily turned off.
Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
Press the projector's power button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
If you unplugged the projector and plugged it right back in, press the power button to turn on the
projector (with Direct Power On enabled).
Check the settings on the Signal menu to make sure they are correct for the current video source.
Adjust the Brightness setting or select the Normal Power Consumption setting.
Check the Display setting to make sure Messages is set to On.
If the projector does not respond when you press the control panel buttons, the buttons may be
locked. Unlock the buttons.
If the projector does not respond when you press buttons on the remote control, make sure the remote
receivers are turned on.
Parent topic: Solving Image or Sound Problems
Related references
Projector Setup Settings - Extended Menu
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Related tasks
Unlocking the Projector's Buttons
146