Epson 1835, 905, 915W, 92, 93, 95, 96W Setting Up Monitoring Using SNMP

When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you

receive an e-mail containing the following information:

•EPSON Projector on the subject line

• The name of the projector experiencing a problem

• The IP address of the affected projector

• Detailed information about the problem

Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.

Parent topic: Setting Up Projector Network E-Mail Alerts

Setting Up Monitoring Using SNMP

Network administrators can install SNMP (Simple Network Management Protocol) software on network

computers so they can monitor projectors. If your network uses this software, you can set up the

projector for SNMP monitoring.

1. Press the Menu button on the remote control.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Others menu and press Enter.

PowerLite 93

Epson Setting Up Monitoring Using SNMP