3.Hold the base so the hooks are turned down and position the base next to the bottom of the monitor.

4.Insert the hooks into the slots on the monitor.

5.Slide the base toward the front of the monitor until the latch clicks into the locked position. Then turn the monitor over so it rests on the base.

Note

Always remove the tilt and swivel base before packing and transporting the monitor. To remove the base, disconnect the power cord from the electrical outlet and disconnect the cables from the back of the monitor. Carefully set the monitor face down on a padded surface. While pressing the latch on the bottom of the monitor, remove the base by lifting the hooks out of the slots.

6 14 ” Super VGA Color Monitor