Important Safety Instructions

Although this monitor is designed to assure your safety, improper use can cause electric shock or fire hazard. In order not to defeat the safeguards incorporated in the monitor, observe the following safety instructions:

1. Read all of these instructions and save them for later reference.

2.Follow all warnings and instructions in this manual and marked on the monitor.

3.The monitor contains shock hazard potential. Do not attempt to open or remove any covers, and do not attempt to service the monitor yourself. Refer all servicing to authorized service personnel.

4. Never push objects of any kind into the monitor through cabinet slots.

5. Do not expose the monitor to liquids, such as rain or spills.

6.Do not place the monitor on an unstable cart, stand, or table, and be careful not to drop it.

7.Do not place the monitor near a heating appliance or in direct sunlight. Intense heat can damage the monitor’s circuitry.

8. Slots and openings on the top, sides, and back of the cabinet are provided for ventilation; do not block or cover these openings. Do not place the monitor in a built-in insulator, such as a bookcase, unless proper ventilation is provided.

9.Power supply voltages outside the monitor’s specified line voltage range may harm the monitor. The monitor should be operated from the type of power source indicated on the rear panel marking label.

10Make sure the combined amperage rating for all products plugged into the wall outlet used for the monitor does not exceed the amperage rating of the wall outlet.

11Use only the power cord supplied with the monitor. If you must use another power cord, make sure it meets the applicable standards (UL/ CSA).

12Do not overload the computer inlet and extension cords as this can result in fire or electric shock.

13. Be careful not to damage the power cord or plug

iii