User's Manual | Scanner | Epson Perfection |
When the scan is completed, a thumbnail of the scan will be added in the left column, and the scanned image will be displayed in the middle area of the screen (Figure 14). All images must be given a name. The AFHCAN software will automatically enter the word SCAN with a sequence number. You can type in a different name manually. At this point, the selected scans can be saved to the case by pressing the Save button. To discard all the currently displayed scans, press Back.
1.1.3.2 Recovering from Manual Mode
As mentioned previously, manual mode is complex and is not recommended for routine scanning. Details on manual mode are beyond the scope of this manual. However, if another user scans with manual mode, you may encounter the TWAIN screens for manual mode when you do a new scan. This is because the software remembers what mode was used last and opens the next scanning session in the same mode. Clicking Cancel during preview brings up the screen show in Figure 16. Clicking Manual Mode in Figure 16 brings up the screen in Figure 17.
Figure 16
TWAIN screen leading to manual mode
15 |