Epson B813021, B813022 Installing the Transparency Unit on the Scanner

Note: •

•

Keep the shipping screw in a safe place; you will need it if you should need to transport the scanner. When transporting the scanner, you should remove the transparency unit and reattach the shipping screw.

If the unit’s lamp assembly is not in its initial position, you cannot attach the shipping screw. If this happens, reattach the unit to the scanner, close the unit, and turn the scanner on; the unit’s lamp assembly then returns to its initial position. Then turn off the scanner and remove the transparency unit.

Installing the Transparency Unit on the Scanner

Follow the steps below to install the transparency unit on the scanner.

1.Make sure the scanner’s power switch is turned off and remove the power cable from the scanner.

2.Remove the document cover from the scanner.

3.The scanner comes with two mounting screws attached; slide the mounting slots on the transparency unit forward underneath these two screws.