You see the license agreement. Read the agreement and click Agree.
4
3 Click the option for the software you want to install, then follow the instructions on the screen to install it on your computer.
Note: At the end of Film Factory installation, deselect the option to launch Film Factory.
4 When you’re finished, click the Back button, then click Install Printer Manual.
Note: You need a browser—such as Microsoft® Internet Explorer® 4.0 or later or Netscape Navigator® 4.0 or later—to view the manual.
5 When you’re finished, click Exit.
6 When you see the EPSON Product Registration screen, register your printer as instructed, then remove the EPSON CD.
You’re ready to print! See your Printer Basics book for details.
Macintosh®
Follow the steps below to install the software on your Macintosh.
1 Make sure your printer is connected and turned on. Then turn on your Macintosh.
2 Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized.
3 If the CD-ROM window doesn’t open automatically, double-click the SPR200 CD-ROM icon. Then double-click EPSON.
Click Install Optional Software. You see this screen:
2
You see the Options Menu. Continue with the instructions below to complete the software installation.
Finishing Windows Installation
1 Make sure you have paper loaded in the printer. Then click Print a Test Page to check that your printer is set up correctly.
At the next screen, click Next. Installation proceeds automatically.
When installation halts, click Finish.
You see the license agreement. Read the agreement and click Agree.
7
8
9
6 Click CD-ROM drive, then click Next. Make sure Specify a location is not checked.