EPSON Stylus C40UX

Control Panel

To diagnose some problems, check the printer’s control panel, as described below, or run a printer check (page 5).

Lights

Problem and solution

 

 

 

 

b on

No paper is loaded in

Load paper in the sheet feeder,

 

the printer

then press the b maintenance

 

 

button. The printer resumes

 

 

printing and the light goes out.

 

 

 

 

Paper has jammed in

Press the b maintenance

 

the printer

button to eject the jammed

 

 

paper. If the error does not clear,

 

 

open the printer cover and

 

 

remove all of the paper inside,

 

 

including any torn pieces. Then,

 

 

reload the paper in the sheet

 

 

feeder and press the

 

 

b maintenance button to

 

 

resume printing.

 

 

 

b

The black or color ink

Obtain a replacement black or

flashing

cartridge is nearly

color ink cartridge. To determine

 

empty

which cartridge is nearly empty,

 

 

check the ink level using EPSON

 

 

Status Monitor 3 (Windows) or

 

 

EPSON StatusMonitor

 

 

(Macintosh).

 

 

 

b on

The black or color ink

Replace the black or color ink

 

cartridge is empty or

cartridge with a new one.

 

not installed

 

 

 

 

P off

The print head is

Turn off the printer. Open the

b on

obstructed by jammed

printer cover and remove any

 

paper or other material

paper or other obstructions from

 

and can’t return to the

the paper path. Then, turn the

 

home position

printer back on. If the error does

 

 

not clear, contact your dealer.

 

 

 

P flashing

An unknown printer

Turn off the printer and contact

b

error has occurred

your dealer.

flashing

 

 

 

 

 

3.Unpack the ink cartridges that came with your printer and remove the yellow tabs.

black cartridge

color cartridge

Don’t remove the seals from the bottom of the cartridges; ink will leak out.

Keep the cartridges out of the reach of children.

4. Insert both cartridges as shown and close the clamps.

black color

Install both ink cartridges or the printer won’t work.

5.Press the b maintenance button and close the printer cover. The P power light flashes and you hear the ink charging.

Don’t turn off the printer or interrupt charging while the P power light is flashing or you’ll use up more ink than necessary when you turn it back on.

6.Wait until ink charging is finished (the P power light stops flashing).

Installing the First Ink Cartridges

1.Turn on the printer.

2.Open the cover and lift the ink cartridge clamps

4 - EPSON Stylus C40UX

5/01