EPSON Stylus® C60
StartStartHereHere
11Unpack
1 Remove everything from the box.
printer | paper support | ink cartridges | Printer Basics |
2 Remove all the tape and packing material.
3 Peel off tape and remove the insert.
remove the insert
4 Fit the paper support into its three slots.
22Connect the Printer
Connect the printer to your computer using either a USB cable or parallel cable. Don’t connect both cables; you only need one or the other. Follow the instructions in the appropriate section below.
If You Have a USB Port 
(Does not support Windows® 95.)
1 | Make sure the printer and computer are turned off. | |
2 | Connect the | square end of the USB cable to your printer’s USB port. |
3 | Connect the | flat end of the cable to any available USB port on your computer. |
If You Have a PC Parallel Port
1 | Make sure the printer and computer are turned off. |
2 | Connect the larger end of the parallel cable to your printer’s parallel port. |
| Then secure it with the wire clips. |
3 | Connect the other end of the cable to your computer’s parallel port and secure it as necessary. |